Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Accuflow Systems MFLEX SILICONE TUB. #17 25FT
Manufactured by Cole Parmer and sold by Accuflow. Masterflex platinum-cured silicone tubing, L/S 17, 25 ft. Ensure optimal performance from your Masterflex pump Slightly greater clarity than peroxide-cured tubing Smooth surfaces; lower pr
Grainger Corrugated Tubing PE 5/16 in 25 ft
The Grainger 16Y251 is a 3M Scotch-Brite General Purpose Hand Pad that features an open web construction with non-scratching fibers for cleaning and scouring. It has a 6 inch by 9 inch size and comes in a pack of 10 pads. The pads are made in the USA and can be used for a variety of cleaning applications including pots, pans, dishes, walls, floors, grills and more. The open web design allows debris to move through the pad during cleaning.
Accuflow Systems 1 Inch PTFE Smooth Bored Hose
1 Inch ID PTFE Smooth Bore Hose Stainless Braided with Silicone Cover 120 Inches OAL
AVANTOR MASTERFLEX (VWR LLC) Dow Corning Pharma-50 Tubing,1/2"" x 3/4"", 50 ft Pack
Applications: Pharmaceutical, biotechnology , and ultra-pure fluid processing. Characteristics: 50 durometer, translucent platinum-cured silicone tubing with a very low extractable profile; it contains no phthalates, plasticizers, latex, or other organic additives. Pharma tubing remains flexible and resilient for long service life. Dow Corning maintains complete traceability from silica to silicone tubing. Certifications: Elastomer exceeds test guidelines for USP Class VI Plastics, and the tubing itself is FDA compliant, and meets 3A Sanitary Standards and European Pharmacopoeia (EP) requirements. Produced under Bulk Pharmaceutical (BP) and current GMP principles. Temperature range: ¿60 to 460¿F (¿51 to 232¿C) Sterilize: Autoclave, ethylene oxide, or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX SILICONE 16 20/CS
Masterflex L/S Bulk-Packed Precision Pump Tubing, Platinum-Cured Silicone, L/S 16; 20 Bags of 25 ft/Bg, Avantor
Foxx Life Sciences EZBiopure Chemically Resistant Fluoroelastomer (FKM) Supercritical Fluid Transfer Tubing 4mm (5/32") ID X 9mm (23/64") OD, 50FT
EZBiopure Fluoroelastomer (FKM) Tubing (popularly known as Viton tubing) is engineered for supercritical fluid transfer and the safe handling of highly corrosive chemicals and solvents in pharmaceutical applications. It is produced in a controlled cleanroom environment to meet stringent food and pharma-grade standards.
Features
Made and packaged in an ISO Class 7 certified cleanroom.
Chemical Resistance: Excellent compatibility with alcohols, acids, and halogenated solvents (e.g., IPA, MDC).
High Safety: Superior flame and fire resistance.
Wide Temperature Range: Operational from –15°C to +250°C.
Applications:
Corrosive chemical transfer
Chlorinated, fluorinated chemical transfer
Chemical and analytical analysis
Fuel and oil industries
Certifications
FDA 21 CFR 177.2600 Certificate
USP Class VI Certificate
Phthalates / Bis Phenol / Plasticizer free Certification
TSE/BSE Free Certification
5 years Shelf Life
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Ultramicrobore PTFE, 0.002"" ID x 0.014"" OD; 100 ft
Use this translucent tubing in extreme temperatures and in harsh chemical environments. It's chemically inert, has low permeability, and has the lowest friction coefficient of any tubing. Temperature range is -400 to 500¿>F (-240 to 260¿>C); melts at 620¿>F (327¿>C). Tensile strength is 2500 to 4000 psi. PTFE tubing resin is UL recognized and complies with FDA (21 CFR 177.1550) and USP Class VI requirements.
Thomas Scientific TUBING 3/4 x 1 1/2 x 3/8 ft (10 ft per pack and 50 ft per
TUBING 3/4 x 1 1/2 x 3/8 ft (10 ft per pack and 50 ft per
Accuflow Systems Altafluor 100 PTFE (polytetrafluoroethylene) - 100 PTFE 3/8"" X 1/2""- 25 FT
Altafluor 100 PTFE was the original TEFLON material developed by E.I.DUPONT CO. PTFE is the most flexiible of all fluoropolymers offered. It has the broadest temperature range of any fluoropolymer and can resist highly corrosive liquids and gases even at elevated temperatures. The smooth surface finish and lowest coefficient of friction and lubricity make it ideal for bushing or bearing applications. Non-flammable. Non-toxic. FDA compliant -21 CFR 177.1550. Very low permeability. Altafluor 100 is compatible with most standard fittings (not suitable for use with flare-type fittings). Applications include use in laboratories, chemical processes, analytical and process equipment, crogenic, electrical, high temp and automotive. Manufactured from 100% virgin grade PTFE resins, it is the most flexible, is chemically inert and resistant to nearly all industrial chemicals and solvents.
Accuflow Systems Saint-Gobain Tygon Tubing, Medical/Surgical, 1/16 in ID, Non-DEHP
Tygon ND 100-65 is a clear, biocompatible, non-DEHP thermoplastic tubing engineered for medical and surgical fluid handling, offering easy visualization of fluid flow and reliable performance in blood-contact applications.
- Clear, non-DEHP thermoplastic for medical use.
- Inner diameter 1/16 in (1.59 mm), outer diameter 1/8 in (3.18 mm), wall 1/32 in (0.79 mm).
- Package length 50 ft (15.24 m).
- Suggested working pressure 3.792 bar (55 psi at 73°F).
- Vacuum rating 29.9 inHg at 73°F (23°C).
- Minimum bending radius 0.250 in (6.35 mm).
- Evaluated to ISO 10993 series and USP testing for biocompatibility.
- Compatible with steam, gamma, and EtO sterilization methods.
- Suitable for blood and IV solutions, dialysis, chemotherapy delivery, and peristaltic pump applications.
Accuflow Systems Saint-Gobain Tygon 2475 Tubing, 1/2 in ID, 50 ft, Plasticizer-Free
Tygon 2475 is a high-purity, plasticizer-free thermoplastic tubing engineered for low extractables and reduced gas permeation. It meets USP Class VI biocompatibility standards and is suitable for medical, diagnostic, and laboratory fluid transfer applications that require chemical resistance and cleanroom compatibility.
- Inner diameter: 1/2 in (12.7 mm).
- Outer diameter: 3/4 in (19.0 mm).
- Wall thickness: 1/8 in (3.2 mm).
- Length: 50 ft (15.2 m).
- Material: Tygon 2475 thermoplastic, plasticizer-free.
- Color: Clear.
- Biocompatibility: Meets USP Class VI.
- Typical applications: diagnostic reagent delivery, medical dispensing, cell and tissue culture transfer, cleanroom fluid lines.
Ace Glass, Inc. ClearGreen; PVC tubing, 3/16in ID - 7/16in OD, Phthalate-Free, box/50 feet
4.8 X 3.2MM VINYL TUBING